Printing By Setting Print Purpose
The print settings that are generally used frequently are pre-registered as print purposes. By using a print purpose to print, you can print with settings that match the document.
The procedure for printing by using a print purpose is as follows:
Open the printer driver setup window
Select the media type
The type of paper set in the printer is displayed.
Select print setting mode
From the pull-down menu, select Easy Settings.
Select print purpose
For Print Target, select the setting that matches the document.
- Default Settings
- Select this when printing general documents such as business documents.
- Photo (Color)
- Select this when printing color illustrations or photos.
- Poster
- Select this when printing posters.
Note- To check the settings of the items that are set by Print Target, click View Settings.
Select the paper size
From the Page Size list on the Page Setup tab, select the same size as that of the document that was created with the application software.
The current settings are displayed in the settings preview on the left side of the window.
Select the paper source
For Paper Source, select the setting that matches your purpose.
Important- The paper feed method will differ depending on the lower level (roll paper 2) settings or roll unit option settings.
Set the other items
Set the other items as necessary.
Complete the setup
Click OK.
When you print, the document is printed with settings to match the specified print purpose.
