Cutting Roll Paper after Printing

The procedure for cutting roll paper automatically and printing cut guidelines is as follows:

1. Open the printer driver setup window

2. Select the paper source

   For Paper Source on the Page Setup tab, select the setting that matches your purpose from Roll Paper (Auto), Roll 1, and Roll 2.

   

   Important

   • The paper feed method will differ depending on the lower level (roll paper 2) settings or roll unit option settings.

3. Display Roll Paper Options dialog box

   Click Roll Paper Options to display the Roll Paper Options dialog box.

   

4. Set auto cut

   From Automatic Cutting, select the item that matches your purpose.
   The current settings are displayed in the settings preview on the left side of the Page Setup tab.

   • Yes

     The roll paper is cut automatically after printing.

   • No

     The roll paper is not cut after printing.

   • Print Cut Guideline

     Cut guidelines are printed for cutting the roll paper manually after printing.

   Note

   • The default setting for automatic cutting is Yes.

   After completing the setting, click OK to return to the Page Setup tab.

5. Complete the setup

   Click OK on the Page Setup tab.
   When you print, the status after printing is set to whatever was set in Automatic Cutting.