skip to main text

Scaled Printing

The procedure for printing a document with pages enlarged or reduced is as follows:

  1. Open the printer driver setup window

  2. Select the paper size of the document

    Using Page Size on the Page Setup tab, select the page size that is set with your application software.

  3. Select the paper source

    For Paper Source, select the setting that matches your purpose.

  4. Select roll paper width

    If you selected a roll paper for Paper Source, set Roll Paper Width to the width of the roll paper loaded in the printer.

  5. Select scaled printing

    Check the Enlarged/Reduced Printing check box.

  6. Set one of scaling methods described below

    From the items listed below, select the setting that matches your purpose and select the corresponding check box.
    The current settings are displayed in the settings preview on the left side of the window.

    • Fit Paper Size

      figure:Fit Paper Size
      Scales the document to match the paper size.
    • Fit Roll Paper Width

      figure:Fit Roll Paper Width
      Scales the document to match the roll paper width.
    • Scaling

      figure:Scaling
      Allows you to specify the scaling by entering a number directly or by selecting the paper size you want from the Printer Paper Size list.
      The document is reduced when a size smaller than the Page Size setting is selected from the Printer Paper Size list, and enlarged when a size larger is selected.
  7. Complete the setup

    Click OK.
    When you execute print, the document will be printed with the specified scale.

Important

  • When the application software which you used to create the original has the scaled printing function, configure the settings on your application software. You do not need to configure the same setting in the printer driver.

Note

  • Selecting Enlarged/Reduced Printing changes the printable area of the document.