Settings on Client PC
After setting up the print server system, set up the client system.
The procedure for setting up the client systems is as follows:
Install the MP Drivers on the client systems
Note- You must manually select the connection destination on the client computer.
During installation, click Cancel in the Connect Cable window. When the confirmation message appears, click Yes.
In the Installation Incomplete window, select the Select printer port check box, click Manual Selection, and then select the appropriate port.
- You must manually select the connection destination on the client computer.
Start the wizard
- If you are using Windows 10, Windows 8.1, or Windows 8, select the Control Panel -> Hardware and Sound -> Devices and Printers -> Add a printer.
- If you are using Windows 7, select the Start menu -> Devices and Printers -> Add a printer.
- If you are using Windows Vista, select the Start menu -> Network -> Add Printer.
The Add Printer window appears.
Add a printer
- If you are using Windows 10, Windows 8.1 or Windows 8, click the icon for the printer that you have configured on the print server system to be shared, and then click Next.
- If you are using Windows 7 or Windows Vista, select Add a network, wireless or Bluetooth printer, and click the icon for the printer that you have configured on the print server system to be shared, and then click Next.
Note- If the icon for the printer is not displayed, check that the printer is actually connected to the print server.
- It may take some time for the icon for the printer to appear.
Complete the setup
Take the appropriate action as described on the screen and then click Finish.
- If you are using Windows 10, Windows 8.1, Windows 8 or Windows 7, the icon for the shared printer will be created in the Devices and Printers window.
- If you are using Windows Vista, the icon for the shared printer will be created in the Printers window.
The setup on the client systems is complete. You can now share the printer in the network.
