Printing Using AirPrint

Checking Your Environment

First, check your environment.

• AirPrint Operation Environment
  Mac running the latest version of OS

• Requirement
  The Mac and the printer must be connected by one of the following methods:

  • Connected to the same network over a LAN
  • Connected directly without wireless router (Direct Connection)
  • Connected by USB

Add The Printer as AirPrint Printer on Your Mac

1. Open System Preferences -> Printers & Scanners

2. Click + next to the printer list

3. Select your printer listed as Bonjour

4. Select Secure AirPrint from Use

5. Click Add

   The Printer will be added as AirPrint Printer on Your Mac

Print with AirPrint from a Mac

1. Check that printer is turned on

2. Load paper in printer

   Set roll paper or cut paper.

3. Start printing from your application software

   The Print dialog opens.

4. Select printer

   Select your model from the Printer list in the Print dialog.

   

   Note

   • Click Show Details to switch the setup window to the detailed display.

5. Check print settings

   Set paper size and other items as needed.
   Set paper type from the printer.

   Note

   • Use the Print dialog to set general print settings such as the layout and the print sequence.
     For information about print settings, refer to macOS help.
   • You can set Print quality settings (Color mode, Print resolution, and Print target), Paper settings (No Top/Btm Space (Save Paper) and Unidirectional printing), and Magnification level for borderless on the operation panel of the printer. For details, see "Print settings."

6. Click Print

   The printer prints according to the specified settings.

Note

• It can take the Wi-Fi a few minutes to get connected after the printer turns on. Print after checking that the printer is connected to the network.
• You cannot use AirPrint if Bonjour settings of printer are disabled. Check LAN settings of printer and enable Bonjour settings.
• Refer to "Cannot Print Using AirPrint" for printing problems when using AirPrint.
• The display of the settings screen may differ depending on the application software you are using.

Deleting Print Job

Use Stop button from printer to cancel the print job.

Restrictions on the AirPrint

• If A2+, A3+, or 13 x 22 is selected for Paper Size in the print dialog, part of the image may not fit on the paper.
• If printing cut paper, the bottom edge of the image may be cut out.
• The roll sheets with the below width cannot be printed without borders.
  • 34.00 in. (863.6 mm)
  • 31.50 in. (800.0 mm)
  • 30.00 in. (762.0 mm)
  • 23.62 in. (600.0 mm)
  • 22.00 in. (558.8 mm)
  • 20.00 in. (508.0 mm)
  • 19.69 in. (500.0 mm)
  • 18.00 in. (457.2 mm)
  • 16.54 in. (420.0 mm)
  • 16.00 in. (406.4 mm)
  • 15.00 in. (381.0 mm)
  • 12.95 in. (329.0 mm)
  • 12.00 in. (304.8 mm)
  • 11.81 in. (300.0 mm)
  • 11.69 in. (297.0 mm)
  • 10.12 in. (257.0 mm)
  • 8.00 in. (203.2 mm)
• If printing cut paper, feed the paper vertically. If the paper is fed horizontally, it will still print vertical images.
• When printing images with large data sizes, the color may turn out uneven. In this case, select Printer settings -> Hard disk settings -> Save first and print -> ON on the operational panel of the printer.
• Some paper sizes that are compatible with the Canon IJ printer driver are not compatible with AirPrint. If using these sizes, set a custom size.
• Canon imagePROGRAF Free Layout and Canon imagePROGRAF Preview cannot be used.