Printing from iOS Device (AirPrint)

Checking Your Environment

First, check your environment.

• AirPrint Operation Environment
  iPhone, iPad, and iPod touch running the latest version of iOS / iPadOS

• Requirement
  The iOS device and the printer must be connected by one of the following methods:

  • Connected to the same network over a LAN
  • Connected directly without wireless router (Direct Connection)

Printing with AirPrint from iOS Device

1. Check that printer is turned on

2. Load paper in printer

   Set roll paper or cut paper.

3. Tap operation icon using your iOS device's application

   The following screen appears when printing from iOS 12's Safari. The screen differs depending on the devices or applications.

   

   Menu options appear.

4. Tap Print

   

5. Select your model name from Printer on Printer Options

   Important

   • Because some applications do not support AirPrint, Printer Options may not be displayed. If an application does not let you use printer options, you cannot print from that application.

6. Check Print Settings

   Set the number of copies to be printed and print options, as needed.

7. Tap Print

   The printer prints according to the specified settings.

Note

• It can take the Wi-Fi a few minutes to get connected after the printer turns on. Print after checking that the printer is connected to the network.
• You cannot use AirPrint if Bonjour settings of printer are disabled. Check LAN settings of printer and enable Bonjour settings.
• Refer to "Cannot Print Using AirPrint" for printing problems when using AirPrint.

Paper Size

With AirPrint, the paper size is selected automatically according to the application being used on the iOS device and the region in which AirPrint is used.

Important

• Depending on the device or OS, the initial settings of paper size may differ.
  Test printing is recommended.
• Depending on the application you are using, the available paper size may differ.

Checking Print Status

You can check the print status of AirPrint from Print Center.
Tap Print Center that is displayed in multitasking mode on your iOS device.

Deleting Print Job

To delete a print job with AirPrint, use one of the following two methods:

• From printer: Use Stop button to cancel the print job.
• From iOS device: Tap Print Center that is displayed in multitasking mode. In the screen that appears, tap on the print job to be deleted, and then tap Cancel Printing.

Restrictions on the AirPrint

• If A2+, A3+, or 13 x 22 is selected for Paper Size in the print dialog, part of the image may not fit on the paper.
• If printing cut paper, the bottom edge of the image may be cut out.
• If printing cut paper, feed the paper vertically. If the paper is fed horizontally, it will still print vertical images.
• The roll sheets with the below width cannot be printed without borders.
  • 34.00 in. (863.6 mm)
  • 31.50 in. (800.0 mm)
  • 30.00 in. (762.0 mm)
  • 23.62 in. (600.0 mm)
  • 22.00 in. (558.8 mm)
  • 20.00 in. (508.0 mm)
  • 19.69 in. (500.0 mm)
  • 18.00 in. (457.2 mm)
  • 16.54 in. (420.0 mm)
  • 16.00 in. (406.4 mm)
  • 15.00 in. (381.0 mm)
  • 12.95 in. (329.0 mm)
  • 12.00 in. (304.8 mm)
  • 11.81 in. (300.0 mm)
  • 11.69 in. (297.0 mm)
  • 10.12 in. (257.0 mm)
  • 8.00 in. (203.2 mm)
• When printing images with large data sizes, the color may turn out uneven. In this case, select Printer settings -> Hard disk settings -> Save first and print -> ON on the operational panel of the printer.