Printing

Checking Your Environment

First, check your environment.

• AirPrint Operation Environment
  Mac running the latest version of OS

• Requirement
  The Mac and the printer must be connected by one of the following methods:

  • Connected to the same network over a LAN
  • Connected by USB

Print from a Mac

1. Check that printer is turned on

   Note

   • If Auto power on is enabled, printer automatically turns itself on when receiving a print job.

2. Load paper in printer

   Register the set paper size on the printer LCD monitor.
   The paper type will be set automatically according to the set paper size.

3. Start printing from your application software

   The Print dialog opens.

4. Select printer

   Select your model from the Printer list in the Print dialog.

   

   Note

   • Click Show Details to switch the setup window to the detailed display.

5. Check print settings

   Set items such as Paper Size to the appropriate size, as well as Paper Type from Media & Quality of the pop-up menu.
   Select Auto Select for Paper Type.

   

   Important

   • An error may occur if the paper size set in the print dialog is different from the paper size set on the printer. Select the correct items on the print dialog and the printer that correspond to the paper being printed.

   Note

   • Use the Print dialog to set general print settings such as the layout and the print sequence.
     For information about print settings, refer to macOS help.

6. Click Print

   The printer prints according to the specified settings.

Note

• It can take the Wi-Fi a few minutes to get connected after the printer turns on. Print after checking that the printer is connected to the network.
• You cannot print if Bonjour settings of printer are disabled. Check LAN settings of printer and enable Bonjour settings.
• Refer to "Cannot Print Using AirPrint" for printing problems.
• The display of the settings screen may differ depending on the application software you are using.