skip to main text

Printing

This printer is compatible with the macOS standard printing system (AirPrint).
You can start printing right away after connecting this printer to your Mac without installing any special software.

Print from a Mac

  1. Check that printer power is on

    Note

    • If Auto power on is enabled, printer automatically turns itself on when receiving a print job.
  2. Load paper in printer

    Register the set paper size with the printer Paper Select button.
    The paper type will be set automatically according to the set paper size.

  3. Start printing from your application software

    The Print dialog opens.

  4. Select printer

    Select your model from the Printer list in the Print dialog.

    figure: Printer in the Print dialog

    Note

    • Click Show Details to switch the setup window to the detailed display.
  5. Check print settings

    Set items such as Paper Size to the appropriate size, as well as Paper Type from Media & Quality of the pop-up menu.
    Select Auto Select for Paper Type.

    figure: Print dialog

    Important

    • An error may occur if the paper size set in the print dialog is different from the paper size set on the printer. Select the correct items on the print dialog and the printer that correspond to the paper being printed.

    Note

    • Use the Print dialog to set general print settings such as the layout and the print sequence.
      For information about print settings, refer to macOS help.
  6. Click Print

    The printer prints according to the specified settings.

Note

  • It can take the wireless LAN a few minutes to get connected after the printer turns on. Print after checking that the printer is connected to the network.
  • You cannot print if Bonjour settings of printer are disabled. Check LAN settings of printer and enable Bonjour settings.
  • Refer to "Cannot Print Using AirPrint" for printing problems.
  • The display of the settings screen may differ depending on the application software you are using.