skip to main text

Page Processing

You can configure advanced settings for printing on roll paper and adjust how much of the document extends outside the paper when printing borderless.

figure:Page Processing in the Print dialog
Roll Paper Width
Select the roll paper width.
Select the width that matches the width of the roll paper loaded in the printer.
Banner Printing
Select this check box to print documents extending over several pages as one continuous document without any spaces between the pages.
Automatic Cutting
You can set whether to have the paper cut automatically or to have cut lines printed on the paper
The following settings can be configured for automatic cutting
Settings Contents

Printer Default

Applies the settings configured in the control panel of the printer unit.

None

After printing is over, the printer goes on to print the next set of data without cutting the paper into individual pages.

Print Cut Guideline

After printing is over, the printer prints cutting lines on each page and goes on to print the next set of data.

Fit Roll Paper Width
The printer automatically expands or reduces the document to match the roll paper width and then prints the document.
Off
The document is printed as-is without being expanded or reduced.
On (Bordered)
The printer automatically expands or reduces the document to match the roll paper width and then prints the document.
On (Borderless)
When borderless printing is performed, the printer automatically enlarges or reduces the document to match the roll paper width and then prints the document.
No Spaces at Top or Bottom
When printing on roll paper, you can save paper by eliminating the upper and lower margins when printing.
Rotate Page 90 degrees
Rotate the long edge of the document 90 degrees, match it to the width of the roll paper, and then print the document.
When you print a portrait document onto roll paper, you can save paper by rotating the document 90 degrees and print the document horizontally relative to the paper.
Borderless Extension
Adjusts how much of the document extends outside the paper by using the Borderless Extension slider bar.
Drag to slider bar to the right to increase the extension amount, and to the left to decrease the extension amount.
Print Centered
Prints document in center of paper.