Print head alignment corrects the installation positions of the print head and improves deviated colors and lines.
This printer supports two head alignment methods: automatic head alignment and manual head alignment.
Normally, the printer is set for automatic head alignment.
If the printing results of automatic print head alignment are not satisfactory, see "Aligning the Print Head Position Manually from Your Computer," and perform manual head alignment.
The procedure for performing automatic print head alignment is as follows:
Note
If the inner cover is open, close it.
Print Head Alignment
Select Test Print from the pop-up menu on the Canon IJ Printer Utility
Click the Print Head Alignment icon
A message is displayed.
Load paper in the printer
Load two sheets of A4 size or Letter size Matte Photo Paper (MP-101) into the rear tray.
Note
Depending on the condition of the printer, you may need to use 3 sheets of A4 size or Letter size Matte Photo Paper (MP-101).
The number of sheets to be used differs when you select the manual head alignment.
Execute head alignment
Make sure that the printer is on and click Align Print Head.
Print head alignment starts.
Important
Do not open the top cover while printing is in progress.
Note
Wait until printing ends before performing other operations. Printing takes about 9 to 10 minutes to complete.
After head alignment is completed, you can print and check the current setting. To do so, click the Print Head Alignment icon and when the message is displayed, click Print Alignment Value.
Page top
|
