The silent function allows you to reduce the operating noise of this machine.
Select when you wish to reduce the operating noise of the printer at night, etc.
Using this function may lower the print speed.
The procedure for using the quiet mode is as follows:
Select Quiet Settings from the pop-up menu on the Canon IJ Printer Utility
If the computer is unable to communicate with the machine, a message appears because the computer cannot access the function information that was set on the machine.
If this happens, click Cancel to display the most recent settings specified on your computer.
Set the quiet mode
If necessary, specify one of the following items:
Select this option when you wish to use the machine with volume of normal operating noise.
Select this option when you wish to reduce the operating noise of the machine.
Select this option when you wish to reduce the operating noise of the machine during a specified period of time.
Set the Start time and the End time of the quiet mode you wish to be activated.
If both are set to the same time, the quiet mode will not function.
You can set the quiet mode from the operation panel of the machine, the printer driver, or ScanGear (scanner driver).
No matter how you use to set the quiet mode, the mode is applied when you perform operations from the operation panel of the machine or printing and scanning from the computer.
Apply the settings
Make sure that the machine is on and click Apply.
Click OK when the confirmation message appears.
The settings are enabled hereafter.
The effects of the quiet mode may be less depending on the print quality settings.
Page top |