skip to main text

Printing on Postcards

This section describes the procedure for postcard printing.

  1. Load postcard on the printer

  2. Select paper size in the Print Dialog

    Select Postcard or Postcard Double from the Paper Size menu.

    Important

    • Return postcards can be used only when you print them from the computer.
    • When printing a return postcard, always set the paper size to Postcard Double from your application software or the printer driver.
    • Do not fold the return postcard. If a crease is formed, the printer will not be able to feed the postcard properly, and this condition will cause line shifts or a paper jam.
    • With return postcards, borderless printing cannot be used.

  3. Select Quality & Media from the pop-up menu

  4. Select the media type

    For Media Type, select the same paper type loaded in the printer.

    Important

    • This printer cannot print on postcards that have photos or stickers attached.
    • When you use the duplex printing function to print a postcard, print the address side first and then print the message side.
    • When printing on each side of a postcard separately, you will get cleaner printing if you print the message side first and then print the address side.
    • The paper settings in the print dialog are different, depending on whether you are printing on the address side or the message side. For details about the cassette paper information to be registered in the print dialog and on the printer, see the following:
    • When you use the duplex printing function, register the paper information for the side to be printed first.

  5. Complete the setup

    Click Print.
    When you execute printing, the data will be printed onto the postcard.

Important

  • If you check the Do not show again check box when a guide message is displayed before printing starts, this will stop any more guide messages from being displayed.