Printing from iOS Device (AirPrint)

Checking Your Environment

First, check your environment.

• AirPrint Operation Environment
  iPhone, iPad, and iPod touch running the latest version of iOS / iPadOS

• Requirement
  The iOS device and the printer must be connected by one of the following methods:

  • Connected to the same network over a LAN
  • Connected directly without wireless router (Direct Connection)

Printing with AirPrint from iOS Device

1. Check that printer is turned on

   Note

   • If Auto power on is enabled, printer automatically turns itself on when receiving a print job.

2. Load paper in printer

3. Tap operation icon using your iOS device's application

   The following screen appears when printing from iOS 12's Safari. The screen differs depending on the devices or applications.

   

   Menu options appear.

4. Tap Print

   

5. Select your model name from Printer on Printer Options

   Important

   • Because some applications do not support AirPrint, Printer Options may not be displayed. If an application does not let you use printer options, you cannot print from that application.

6. Check Print Settings

   Set the number of copies to be printed and print options, as needed.

7. Tap Print

   The printer prints according to the specified settings.

Note

• It can take the Wi-Fi a few minutes to get connected after the printer turns on. Print after checking that the printer is connected to the network.
• You cannot use AirPrint if Bonjour settings of printer are disabled. Check LAN settings of printer and enable Bonjour settings.
• Refer to "Cannot Print Using AirPrint" for printing problems when using AirPrint.

Paper Size

With AirPrint, you can print by selecting the paper set in your printer.
Set the paper in the printer in advance and register the paper type and paper size with AirPrint.
For details on how to register paper, see "Set Paper."

Printing of Envelopes

For printing on the envelope from iOS device with AirPrint, refer to the following.

Print result image	Orientation of print data	Orientation of loading envelope
	The print data is rotated by 180 degrees against the print result image.	Load the envelope in vertically with the address side facing up so that the folded flap of the envelope will be faced down on the right side.

Checking Print Status

You can check the print status of AirPrint from Print Center.
Tap Print Center that is displayed in multitasking mode on your iOS device.

Deleting Print Job

To delete a print job with AirPrint, use one of the following two methods:

• From printer: Use Stop button to cancel the print job.
• From iOS device: Tap Print Center that is displayed in multitasking mode. In the screen that appears, tap on the print job to be deleted, and then tap Cancel Printing.