Changing the Printer Operation Mode

The procedure for configuring Custom Settings is as follows:

1. Make sure that the printer is on, and then select Custom Settings from the pop-up menu on the Canon IJ Printer Utility

   Note

   • If the computer is unable to communicate with the printer, a message may be displayed because the computer cannot access the function information that was set on the printer.
     If this happens, click Cancel to display the most recent settings specified on your computer.

2. If necessary, complete the following settings:

   Ink Drying Wait Time

   You can set the length of the printer rest time until printing of the next page begins. Moving the slider to the right increases the pause time, and moving the slider to the left decreases the time.
   If the paper gets stained because the next page is ejected before the ink on the printed page dries, increase the ink drying wait time.
   Reducing the ink drying wait time speeds up printing.

   Prevent paper abrasion

   The printer can increase the gap between the print head and the paper during high-density printing to prevent paper abrasion.
   Check this check box to prevent paper abrasion.

   Align heads manually

   Usually, the Print Head Alignment function of Test Print on the pop-up menu in the Canon IJ Printer Utility is set to automatic head alignment, but you can change it to manual head alignment.
   If the printing results of automatic print head alignment are not satisfactory, perform manual head alignment.
   Check this check box to perform the manual head alignment. Uncheck this check box to perform the automatic head alignment.

3. Apply the settings

   Click Apply and when the confirmation message appears, click OK.

   The printer operates with the modified settings hereafter.