Search Screen

Note

• This screen is not available depending on the printer you are using.

The access points detected are listed.

1. Detected Access Points:

   The signal strength from the access point, encryption type, name of access point, and the radio channel can be confirmed.

   Important

   • If you connect to a network that is not protected with security measures, there is a risk of disclosing data such as your personal information to a third party.

   Note

   • Signal strength is displayed as follows.

     : Good

     : Fair

     : Poor

   • Type of encryption is displayed as follows.

     Blank: No encryption

     WEP: WEP is set

     WPA/WPA2: WPA/WPA2 is set

2. Update

   Click to update the list of access points when your target access point is not detected.

   If the target access point is set to the stealth mode, click Cancel to return to the previous screen and enter the access point's SSID in SSID: on the Wireless LAN sheet.

   Wireless LAN Sheet

   Note

   • When detecting your target access point, make sure that the access point is turned on.

3. Set

   Click to set the access point's SSID in SSID: on the Wireless LAN sheet.

   Note

   • The WEP Details screen or the WPA/WPA2 Details screen appears if the selected access point is encrypted. In this case, configure the details to use the same encryption settings set to the access point.

   • Access points that cannot be used by this machine (including those configured to use different encryption methods) are displayed grayed out and cannot be configured.