skip to main text

PSK: Passphrase and Dynamic Encryption Setup Screen

Note

  • This screen is not available depending on the printer you are using.

Enter the passphrase and select the dynamic encryption method.

figure: PSK: Passphrase and Dynamic Encryption Setup screen

  1. Passphrase:

    Enter the passphrase set to the access point. The passphrase should be a string of 8 to 63 alphanumeric characters or a 64-digit hexadecimal value.

    If you do not know the access point passphrase, refer to the instruction manual provided with the access point or contact its manufacturer.

  2. Dynamic Encryption Type

    Select the dynamic encryption method from either TKIP (Basic Encryption), or AES (Secure Encryption) according to the setting of the access point.