skip to main text

Changing the Settings in the Admin Password Sheet

  1. Start up IJ Network Tool.

  2. Select the printer in Printers:.

  3. Click the Configuration... button.

  4. Click the Admin Password button.

    The Admin Password sheet is displayed.

  5. Change the settings or confirm.

    figure: Configuration screen
    1. Use admin password

      Set a password for the administrator with privileges to set up and change detailed options. To use this feature, select this check box and enter a password.

      Important

      • The password should consist of alphanumeric characters and be no longer than 32 characters. The password is case-sensitive. Do not forget the password you set.

    2. Password:

      Enter the password to set.

    3. Password Confirmation:

      Enter the password again for confirmation.

  6. Click OK.

    A screen is displayed asking you for confirmation before the settings are sent to the printer. If you click OK, the settings are sent to the printer and the Transmitted Settings screen is displayed.

Enter Password Screen

The following screen is displayed if an administrator password is set to the printer.

figure: Enter Password screen
  • Admin Password

    Enter the admin password that was set. For security purposes, your password is not displayed as you type it.

  • OK

    Click this item after you enter the admin password.

  • Cancel

    This item returns you to list of detected printers. If you do not enter the correct admin password, you cannot operate the printer.