skip to main text

Using Red-Eye Correction

You can reduce red eye caused by a camera flash.

There are two Red-Eye Correction methods: automatic and manual.

Note

  • You can automatically correct red eyes when printing. For the setting procedure, see Print Settings Dialog or "Print Dialog". For details on the Print dialog, see Help of Mac OS.

  1. Select the image(s) you want to correct.

  2. Click Correct/Enhance at the bottom of the screen.

    The Correct/Enhance Images window appears.

    figure: Correct/Enhance Images window

  3. Select the image you want to correct from the Selected Images area.

    The selected image appears in the Preview area.

    Note

    • If only one image is selected, only the preview appears and the Selected Images area does not appear.

Auto Correction:

  1. Make sure that Auto is selected.

  2. Click Red-Eye Correction.

  3. Click OK.

    Red eyes are corrected and the (Correction/Enhancement) mark appears on the upper left of the image.

    Important

    • Areas other than the eyes may be corrected depending on the image.

    Note

    • Click (Display Comparison Screen) to display the images before and after the correction side by side in a separate window so that you can compare and check the result.
    • Click Reset Selected Image to undo all corrections.
    • Select the Apply to all images checkbox to correct the images displayed in the Selected Images area at one time.

Manual Correction:

  1. Click Manual, then click Correct/Enhance.

  2. Click Red-Eye Correction.

    figure: Correct/Enhance Images window Manual tab

    Note

    • The correction level can be changed by moving the slider displayed below Red-Eye Correction.
    • When the cursor is moved over the image, the shape of the cursor changes to (Cross).

  3. Drag to specify the red area you want to correct, then click OK over the image.

    figure: OK button

    Red eyes are corrected and the (Correction/Enhancement) mark appears on the upper left of the image.

    Note

    • Click (Display Comparison Screen) to display the images before and after the correction side by side in a separate window so that you can compare and check the result.
    • Click Undo to undo the last operation.

  1. Click Save Selected Image or Save All Corrected Images.

    Corrected image(s) is (are) saved as a new file(s).

    Note

    • To save only the image(s) you like, select it (them) and click Save Selected Image. Click Save All Corrected Images to save all the corrected images at one time.
    • The corrected image(s) can be saved in JPEG/Exif format only.

  2. Click Exit.

    Important

    • If the corrected image(s) is (are) not saved, the correction(s) will be deleted.