skip to main text

Front View

(1) top cover
Open to replace an ink tank or remove jammed paper inside the printer.
(2) paper support
Extend to load paper in the rear tray.
(3) rear tray

Load paper here. Two or more sheets of the same size and type of paper can be loaded at the same time, and fed automatically one sheet at a time.

(4) paper guides
Align with both sides of the paper stack.
(5) front cover
Open to pull out the paper output tray before printing.
(6) paper output tray
Printed paper is ejected. Open it before printing.
  • * All lamps are shown lit in the above figure for explanatory purposes.
(7) RESUME/CANCEL button/Alarm lamp
Press to cancel a print job in progress. This lamp lights or flashes orange when an error occurs. You can press this button to release from printer error status and resume printing, after the printer problem is resolved.

Note

  • You can check the status of the printer by the POWER and Alarm lamps.

    • POWER lamp is off: The power is off.
    • POWER lamp lights white: The printer is ready to print.
    • POWER lamp flashes white: The printer is getting ready to print, or printing is in progress.
    • Alarm lamp flashes orange: An error has occurred and the printer is not ready to print.
    • POWER lamp flashes white and Alarm lamp flashes orange alternately: An error that requires contacting the service center may have occurred.
(8) ON button/POWER lamp
Press to turn the power on or off. This lamp lights white after flashing when the power is turned on.