skip to main text

Cleaning the Pad in the Cassette

If the pad in a cassette is smeared with paper powder or dirt, two or more sheets of paper may be ejected. Follow the procedure below to clean the pad in a cassette.

You need to prepare: cotton swab

  1. Pull out the cassette 1 or cassette 2 from the printer, then remove all the paper.

  2. Clean the pad (A) sideways with a moistened cotton swab.

    Important

    • After cleaning the smeared pad, dry it completely.

    For an example of the cassette 1:

  3. Reload the paper, then insert the cassette into the printer.

    Note

    • If a message is displayed on the screen after inserting the cassette into the printer, press the OK button.

If the problem is not resolved, contact the service center.