You can print out the network settings of the printer such as its IP address and SSID.
ImportantThis print out contains valuable information about your computer. Handle it with care.
Make sure that the printer is turned on.
Load a sheet of A4 or Letter-sized plain paper.
Press and hold the RESUME/CANCEL button until the POWER lamp flashes 6 times.
Release the RESUME/CANCEL button.
The printer starts printing the network setting information.
The following information on the printer's network setting is printed out.
|
Item |
Explanations of the item |
Setting |
|---|---|---|
|
Wired LAN |
Wired LAN |
Enable/Disable |
|
Connection |
Status of the Wired LAN |
Active/Inactive |
|
MAC Address |
MAC Address |
XX:XX:XX:XX:XX:XX |
|
TCP/IP Version |
TCP/IP Version |
IPv4 & IPv6/IPv4 |
|
IPv4 IP Address |
Selected IP Address (IPv4) |
XXX.XXX.XXX.XXX |
|
IPv4 Default Gateway |
Default Gateway (IPv4) |
XXX.XXX.XXX.XXX |
|
Subnet Mask |
Subnet Mask |
XXX.XXX.XXX.XXX |
|
IPv6 IP Address *1 |
Selected IP Address (IPv6) |
XXXX:XXXX:XXXX:XXXX |
|
IPv6 Default Gateway *1 |
Default Gateway (IPv6) |
XXXX:XXXX:XXXX:XXXX |
|
Subnet Prefix Length*1 |
Subnet Prefix Length |
XXX |
|
IPsec*2 |
IPsec setting |
Active |
|
Security Protocol*2 |
Method of the Security Protocol |
ESP/ESP & AH/AH |
|
Other Settings |
Other settings |
- |
|
Printer Name |
Printer name |
Printer name (Up to 15 characters) |
|
WSD |
WSD setting |
Enable/Disable |
|
WSD Timeout |
Timeout |
1/5/10/15/20 [min] |
|
LPR Protocol |
LPR protocol setting |
Enable/Disable |
|
Bonjour |
Bonjour setting |
Enable/Disable |
|
Bonjour Service Name |
Bonjour service name |
Bonjour service name (Up to 52 characters) |
|
IP Address Filtering |
IP Address Filtering |
Enable/Disable |
("XX" represents alphanumeric characters.)
*1 Only when IPv6 is activated, the status of the network is printed.
*2 Only IPv6 and the IPsec setting are activated, the status of the network is printed.
Page top |
