Home

Click Here to Search

S406

Printing the Nozzle Check Pattern

Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.

 Note

 You can also print the nozzle check pattern using the computer.

Use Your Computer to Print a Nozzle Check Pattern

 If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the ink tank whose ink is low.

Replacing an Ink Tank

You need to prepare: a sheet of A4 or Letter-sized plain paper

  1. Make sure that the power is turned on.

  1. Make sure that one or more sheets of A4 or Letter-sized plain paper are loaded in the rear tray.

 Important

 The manual feed tray is not available for the nozzle check pattern print. Be sure to load paper in the rear tray.

  1. Open the paper output tray gently, then pull out the output tray extension.

 Important

 If the inner cover is open, close it.

  1. Hold down the RESUME/CANCEL button until the POWER lamp flashes white twice, then release it immediately.

The nozzle check pattern will be printed.

Do not perform any other operations until the printer completes the printing of the nozzle check pattern.

  1. Examine the nozzle check pattern.

Examining the Nozzle Check Pattern

Page top