A001
Safety Precautions
Choosing a location
- Do not install the machine in a location that is unstable
or subject to
excessive vibration.
- Do not install the machine in locations that are very humid
or dusty,
in direct sunlight, outdoors, or close to a heating source.
To avoid the risk of fire or electric shocks, use the machine under the
operating environment specified in the On-screen Manual.
- Do not place the machine on a thick rug or carpet.
- Do not place the machine with its back attached to the wall.
Power supply
- Ensure that the area around the power outlet is kept clear
at all times
so you can easily unplug the power cord if necessary.
- Never remove the plug by pulling on the cord.
Pulling the cord may damage the power cord, leading to possible fire or
electrical shock.
- Do not use an extension lead/cord.
Working around the machine
- Never put your hands or fingers in the machine while it is
printing.
- When moving the machine, carry the machine at both ends. In
case the
machine weighs more than 14 kg, it is recommended to have two
people lifting the machine. Accidental dropping of the machine
causes injury.
For the machine's weight, refer to the On-screen Manual.
- Do not place any object on the machine. Especially do not
place metal
objects (paper clips, staples, etc.) or containers of flammable
solvents (alcohol, thinners, etc.) on top of the machine.
- Do not transport or use the machine on a slant, vertically
or
upside-down, as the ink may leak and damage the machine.
Working around the machine (For the
multifunction printer)
- When loading a thick book on the Platen Glass, do not press
hard on the
Document Cover. The Platen Glass may break and cause injury.
Print Heads/ink tanks and FINE
Cartridges
- Keep ink tanks out of the reach of children. In case ink*
is
accidentally licked or swallowed, rinse out mouth or give one or two
glasses of water to drink. If irritation or discomfort occurs,
obtain medical advice
immediately.
* Clear Ink contains nitrate salts (For models containing Clear Ink).
- In case ink gets in contact with eyes, rinse with water
immediately. In
case ink gets in contact with skin, wash with soap and water
immediately. If irritation to eyes or skin persists, obtain
medical advice immediately.
- Never touch the electrical contacts on a Print Head or FINE
Cartridges
after printing.
The metal parts may be very hot and could cause burns.
- Do not throw ink tanks and FINE Cartridges into fire.
- Do not attempt to disassemble or modify the Print Head, ink
tanks, and
FINE Cartridges.