Change wireless/wired
Activates either wireless LAN or wired LAN. You can also deactivate wireless/wired LAN.
Wireless LAN setup
Selects the setup method for wireless LAN connection.
NoteYou can also enter this setting menu by selecting WLAN setup from the menu screen.
When this menu is selected, the machine starts searching for a WPS-compatible access point. If the machine detects the access point, follow the on-screen instructions to set up wireless LAN. If an access point is not detected or if you select another setup method, select one of the setup methods below.
Standard setup
Select when you perform settings for wireless LAN manually using the operation panel of the machine.
WPS
Select when you perform settings for wireless LAN using Wi-Fi Protected Setup (WPS). Select Push button method or PIN code method according to the method your access point supports, then follow the on-screen instructions.
Other setup
Select Advanced setup, then follow the on-screen instructions.
Confirm LAN settings
The list of wireless/wired LAN settings of this machine is displayed on the LCD.
You can print the list from this setting menu.
WLAN setting list
The list of wireless LAN settings of this machine is displayed on the LCD.
The following setting items are displayed.
|
Items |
Setting |
|---|---|
|
Connection |
Active/Inactive |
|
SSID |
XXXXXXXXXXXXXXXX |
|
Communication mode |
Infrastructure |
|
Channel |
XX |
|
Wireless LAN security |
Inactive/WEP(64bit)/WEP(128bit)/WPA-PSK(TKIP)/WPA-PSK(AES)/WPA2-PSK(TKIP)/WPA2-PSK(AES) |
|
IPv4 address |
XXX. XXX. XXX. XXX |
|
IPv4 subnet mask |
XXX. XXX. XXX. XXX |
|
IPv4 default gateway |
XXX. XXX. XXX. XXX |
|
IPv6 address |
XXXX: XXXX: XXXX: XXXX: |
|
IPv6 subnet prefix length |
XXX |
|
IPv6 default gateway |
XXXX: XXXX: XXXX: XXXX: |
|
MAC address |
XX:XX:XX:XX:XX:XX |
|
IPsec settings |
Enable (ESP)/Enable (ESP & AH)/Enable (AH)/Inactive |
|
Pre-shared key |
XXXXXXXXXXXXXXXX |
|
Printer name |
XXXXXXXXXXXXXXX |
|
Bonjour service name |
XXXXXXXXXXXXX |
("XX" represents alphanumeric characters.)
LAN setting list
The list of wired LAN settings of this machine is displayed on the LCD.
The following setting items are displayed.
|
Items |
Setting |
|---|---|
|
Connection |
Active/Inactive |
|
IPv4 address |
XXX. XXX. XXX. XXX |
|
IPv4 subnet mask |
XXX. XXX. XXX. XXX |
|
IPv4 default gateway |
XXX. XXX. XXX. XXX |
|
IPv6 address |
XXXX: XXXX: XXXX: XXXX: |
|
IPv6 subnet prefix length |
XXX |
|
IPv6 default gateway |
XXXX: XXXX: XXXX: XXXX: |
|
MAC address |
XX:XX:XX:XX:XX:XX |
|
IPsec settings |
Enable (ESP)/Enable (ESP & AH)/Enable (AH)/Inactive |
|
Pre-shared key |
XXXXXXXXXXXXXXXX |
|
Printer name |
XXXXXXXXXXXXXXX |
|
Bonjour service name |
XXXXXXXXXXXXX |
("XX" represents alphanumeric characters.)
Print LAN details
You can print out the network settings of the machine such as its IP address and SSID.
For more information on the machine's network setting is printed out:
Printing Out Network Setting Information
ImportantThis printout contains valuable information about your computer. Handle it with care.
Other settings
Set printer name
Specifies the printer name. You can use up to 15 characters for the name.
NoteYou cannot use the same printer name as that already used for other LAN connected devices.
You cannot use a hyphen for the initial or last character of the printer name.
TCP/IP settings
Performs IPv4 or IPv6 setting.
WSD setting
Setting items when you use WSD (one of the network protocols supported in Windows 7 and Windows Vista).
Selects whether WSD is enabled or disabled.
NoteWhen this setting is activated, the printer icon is displayed on the Network Explorer in Windows 7 and Windows Vista.
Selecting Enable allows you to transfer the scanned data to the computer using WSD.
Specifies the timeout length.
Bonjour settings
Setting items for LAN using Bonjour for Mac OS.
Selecting Enable allows you to use Bonjour to perform the network settings.
Specifies the Bonjour service name. You can use up to 48 characters for the name.
NoteYou cannot use the same service name as that already used for other LAN connected devices.
LPR protocol setting
Activates/deactivates the LPR setting.
PictBridge communication
Setting items for printing from a PictBridge compliant device.
Selecting Enable allows you to print from a PictBridge compliant device.
Specifies the timeout length.
Wireless LAN DRX setting
Selecting Enable allows you to activate discontinuous reception when using wireless LAN. It allows you to save electricity.
NoteDepending on the access point you are using, discontinuous reception may not be activated even though Enable is selected.
Discontinuous reception is activated only while the machine is on standby. (The LCD is in the screen saver mode.)
Wired LAN DRX setting
Selecting Enable allows you to activate discontinuous reception when the machine is connected to a device compatible with wired LAN. It allows you to save electricity.
Reset LAN settings
Initializes the network settings on the machine.
ImportantNote that initialization erases all connection settings with computers, and printing or scanning operation may become impossible. To use the machine over network, perform setup with the Setup CD-ROM. Be careful when you initialize the network settings on the machine.
NoteWhen you initialize the network settings using IJ Network Tool:
Page top |
