Print settings

Prevent paper abrasion

Use this setting only if the print surface becomes smudged.

Important

• Be sure to set this back to OFF after printing since it may result in lower printing speed or lower print quality.

Extended copy amount

Selects the amount of image that extends off the paper when printing in borderless (full).

Slight cropping may occur at the edges since the copied image is enlarged to fill the whole page. You can change the width to be cropped from the borders of the original image as needed.

Cropped area will be larger if Extended amount: Large is selected.

Important

• This setting can be applied under the following conditions:

  - performing borderless copying

  - Borderless is selected for Border when copying printed photos

Note

• If printouts contain margins even though you are printing in Borderless, specifying Extended amount: Large for this setting may help solve the problem.

Adjust disc print area

You can adjust the disc printing area if the image is not aligned with the printable disc.

You can adjust the printing area by 0.003 inches/0.1 mm between -0.03 inches/-0.9 mm and +0.03 inches/+0.9 mm.

Auto photo fix setting

When ON is selected, you can select whether to print photos using the Exif information recorded in the image files in the following cases.