Printing the Nozzle Check Pattern
Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.
Note
- If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the FINE cartridge whose ink is low.
You need to prepare: a sheet of A4 or Letter-sized plain paper
-
Make sure that the power is turned on.
-
Load a sheet of A4 or Letter-sized plain paper in the front tray.
-
Open the output tray extension, open the paper output tray, then extend the paper output support.
-
Print the nozzle check pattern.
-
Press the Setup button.
The Setup menu screen will appear.
-
Use the or button to select Maintenance, then press the OK button.
-
Use the or button to select Nozzle check, then press the OK button.
The nozzle check pattern will be printed.
-