skip to main text

Copying Photos

You can scan printed photos and print them all at one time.

  1. Make sure that the machine is turned on.

  2. Load the photo paper.

  3. Flick the HOME screen, then tap Advanced print.

    Using the Operation Panel

  4. Tap Photo copy.

  5. Confirm the on-screen instructions, then tap OK.

  6. Load the printed photo on the platen glass following the on-screen instructions, then tap OK.

    Note

    When scanning is complete, the print settings confirmation screen is displayed.

  7. Specify the settings as necessary.

    Flick to display setting items, then tap the setting item to display the settings. Tap to specify the setting.

    figure: Touch screen

    Note

    • Depending on the setting item, some settings cannot be specified in combination with the setting of other setting items. If the setting cannot be specified in combination is selected, and Error details are displayed on the touch screen. In this case, tap on the upper left on the touch screen to confirm the message, then change the setting.

    1. Copies

      Specifies the number of copies.

    2. Page size

      Select the page size of the loaded paper.

    3. Type (Media type)

      Select the media type of the loaded paper.

    4. Print qlty (Print quality)

      Select print quality according to the original.

    5. Border (Bordered/Borderless print)

      Select bordered or borderless print.

    6. Photo fix

      Select No correction, Auto photo fix, or Fade restoration.

      Note

      • When No correction is selected, the machine prints the scanned image without correction.

      • When Auto photo fix is selected, the machine corrects the scanned image automatically.

      • When Fade restoration is selected, the machine corrects the scanned image that have faded over time.

    7. By tapping, you can preview an image of the printout on the preview screen. Flick the photo to change the display.

    Note

    • If appears on the photo, the printed photo may not be scanned properly. Rescan the printed photo.

  8. Touch the Color button for color copying, or the Black button for black & white copying.

    The machine starts printing.

    Note

    • If the printed photo was not scanned properly, the confirmation screen asking you if you continue printing is displayed. By tapping Yes, the machine starts printing. If you rescan the photo, tap No and scan the photo again.