You may have to load the original in a different position depending on the function you selected in copying, scanning, etc. Load the original in the correct position according to the selected function. If you do not load the original correctly, it may not be scanned properly.
Load originals to copy
In Scan,
- select Auto scan for Doc.type to scan text documents, magazines, or newspapers
- select Document or Photo for Doc.type and specify a standard size (A4, Letter, etc.) for Scan size to scan originals
With a software application on a computer,
- scan text documents, magazines, or newspapers
- select a standard size (A4, Letter, etc.) to scan originals
Load the original WITH THE SIDE TO SCAN FACING DOWN and align it with the alignment mark .
Important
The machine cannot scan the shaded area (A) (0.04 inches (1 mm) from the edges of the platen glass).
|
Scan only one disc in Copy label to disc label
Scan only one printed photo in Photo copy
In Scan,
- select Auto scan for Doc.type to scan one printed photo, postcard, business card, or disc
- select Photo for Doc.type and specify Auto scan for Scan size to scan one original
Scan one printed photo, postcard, business card, or disc with a software application on a computer
Load the original WITH THE SIDE TO SCAN FACING DOWN and place it at least 0.4 inches (10 mm) away from the edges of the platen glass.
Scan two or more printed photos in Photo copy
In Scan,
- select Auto scan for Doc.type to scan two or more printed photos, postcards, or business cards
- select Photo for Doc.type and specify Auto multi scan for Scan size to scan two or more originals
Scan two or more printed photos, postcards, or business cards with a software application on a computer
Load two or more originals WITH THE SIDE TO SCAN FACING DOWN and place them at least 0.4 inches (10 mm) away from the edges of the platen glass and at least 0.4 inches (10 mm) apart from each other.
(A) 0.4 inches (10 mm)
Note
The Skew Correction function automatically compensates for the originals placed at an angle of up to approximately 10 degrees. Slanted photos with a long edge of 7.1 inches (180 mm) or more cannot be corrected. Non-rectangular or irregular shaped photos (such as cut out photos) may not be scanned properly. |
Page top |