Print settings

• Prevent paper abrasion

  Use this setting only if the print surface becomes smudged.

  Important

  • Be sure to set this back to OFF after printing since it may result in lower printing speed or lower print quality.

• Extended copy amount

  Selects the amount of image that extends off the paper when printing in borderless (full).

  Slight cropping may occur at the edges since the copied image is enlarged to fill the whole page. You can change the width to be cropped from the borders of the original image as needed.

  Cropped area will be larger if Extended amount: Large is selected.

  Important

  • This setting can be applied under the following conditions:

    - performing borderless copying

    - Borderless is selected for Border when copying printed photos

  Note

  • If printouts contain margins even though you are printing in Borderless, specifying Extended amount: Large for this setting may help solve the problem.

• Auto photo fix setting

  When ON is selected, you can select whether to print photos using the Exif information recorded in the image files in the following cases.

  • Auto photo fix is selected for Photo fix when printing from a memory card.

  • When Auto photo fix is selected for Photo fix in printing a photo in online photo album.

  • The print setting on the PictBridge (Wireless LAN) compliant device is set to Default* or On when printing with a PictBridge (Wireless LAN) compliant device.

    * When Default is selected for the print setting on the PictBridge (Wireless LAN) compliant device, select Auto photo fix for Photo fix in PictBridge print settings.

• Prevent paper double-feed

  Select ON to prevent double-feed of plain paper.

  Important

  • Select ON only when double-feed of plain paper occurs.

• Detect paper width

  When you print from the machine with ON selected, the machine detects the paper width. If the size of loaded paper does not match with that specified with the machine, a message is displayed on the LCD.