Printing Out Network Setting Information
You can print out the current network settings of the machine using the operation panel of the machine.
Important
-
This print out contains valuable information about your computer. Handle it with care.
-
Select Setup on the HOME screen.
The menu screen is displayed.
-
Select Device settings, then press the OK button.
-
Use the button to select LAN settings, then press the OK button.
-
Use the button to select Confirm LAN settings, then then press the OK button.
-
Use the button to select Print LAN details, then press the OK button.
-
Use the button to select Yes, then press the OK button to start printing.
The machine starts printing the network setting information.
The following information on the machine's network setting is printed out.
Item
Explanations of the item
Setting
Wireless LAN
Wireless LAN
Enable/Disable
Connection
Connection status
Active/Inactive
MAC Address
MAC Address
XX:XX:XX:XX:XX:XX
SSID
SSID
SSID of the wireless LAN/SSID of the access point mode
Password
Password
Password of the access point mode (8 to 10 alphanumeric characters)
Communication Mode
Communication Mode
Infrastructure/Access Point Mode
Channel *1
Channel
XX (1 to 13)
Encryption
Method of the Encryption
none/WEP/TKIP/AES
WEP Key Length
WEP Key Length
Inactive/128/64
Authentication
Method of the Authentication
none/auto/open/shared/WPA-PSK/WPA2-PSK
Signal Strength
Signal Strength
0 to 100 [%]
TCP/IP Version
TCP/IP Version
IPv4 & IPv6/IPv4
IPv4 IP Address
Selected IP Address (IPv4)
XXX.XXX.XXX.XXX
IPv4 Default Gateway
Default Gateway (IPv4)
XXX.XXX.XXX.XXX
Subnet Mask
Subnet Mask
XXX.XXX.XXX.XXX
IPv6 IP Address *2
Selected IP Address (IPv6)
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXIPv6 Default Gateway *2
Default Gateway (IPv6)
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXSubnet Prefix Length *2
Subnet Prefix Length
XXX
IPsec *3
IPsec setting
Active
Security Protocol *3
Method of the Security Protocol
ESP/ESP & AH/AH
Wireless LAN DRX
Discontinuous reception (wireless LAN)
Enable/Disable
Other Settings
Other settings
-
Printer Name
Printer name
Printer name (Up to 15 alphanumeric characters)
WSD
WSD setting
Enable/Disable
WSD Timeout
Timeout
1/5/10/15/20 [min]
LPR Protocol
LPR protocol setting
Enable/Disable
Bonjour
Bonjour setting
Enable/Disable
Bonjour Service Name
Bonjour service name
Bonjour service name (Up to 52 alphanumeric characters)
PictBridge Commun.
PictBridge Communication
Enable/Disable
DNS Server
Getting DNS Server automatically
Auto/Manual
Primary Server
Primary server address
XXX.XXX.XXX.XXX
Secondary Server
Secondary server address
XXX.XXX.XXX.XXX
Proxy Server
Proxy Server setting
Enable/Disable
Proxy Port
Specifying Proxy Port
1 to 65535
Proxy Address
Proxy Address
XXXXXXXXXXXXXXXXXXXX
("XX" represents alphanumeric characters.)
*1 Depending on the country or region of purchase, one of the channels from 1 to 11 is printed.
*2 Only when IPv6 is enabled, the status of the network is printed.
*3 Only IPv6 and the IPsec setting are enabled, the status of the network is printed.