Operation Panel

* The Wi-Fi and Alarm lamps are shown lit in the illustration below for explanatory purposes.

(1) ON lamp

Lights green after flashing when the power is turned on.

Note ON and Alarm lamps  You can check the status of the machine by the ON and Alarm lamps. – ON lamp is off: The power is off. – ON lamp lights green: The machine is ready to print. – ON lamp flashes green: The machine is getting ready to print, or printing is in progress. – Alarm lamp flashes orange: An error has occurred and the machine is not ready to print. "Support Code Corresponding to the Number of Flashes of the Alarm Lamp" in If an Error Occurs – ON lamp flashes green and Alarm lamp flashes orange alternately: An error that requires contacting the service center may have occurred. "Support Code Corresponding to the Number of Alternate Flashes of the ON Lamp and the Alarm Lamp" in If an Error Occurs

(2) ON button

Turns the power on or off. Before turning on the power, make sure that the document cover is closed.

Turning the Machine On and Off

(3) Wi-Fi lamp

Lights or flashes blue to indicate the wireless LAN status.

Lights:

Wireless LAN connection is enabled.

Flashes:

Printing or scanning over wireless LAN. Also flashes while configuring the wireless LAN connection.

(4) Wi-Fi button

Hold down to automatically set up the wireless LAN connection.

(5) ink lamps

Light or flash orange when ink runs out, etc.

The left lamp indicates the color FINE cartridge status, the right lamp the black FINE cartridge status.

(6) Paper button

Selects the page size and media type.

(7) Paper lamp

Lights to indicate the page size and media type selected with the Paper button.

(8) Stop button

Cancels operations. You can press this button to cancel a print, copy, or scan job in progress. Holding this button down lets you select maintenance options or machine settings.

(9) Color button*

Starts color copying. You can also press this button to finalize your selection for the setting item.

(10) Black button*

Starts black & white copying. You can also press this button to finalize your selection for the setting item.

(11) Alarm lamp

Lights or flashes orange when an error occurs, such as paper-out or ink-out. When performing machine maintenance or machine settings, options can be selected according to the number of flashes.

* In the software applications or manuals, the Color and Black buttons are collectively called the "Start" or "OK" button.