About Quiet setting

Enables this function on the machine if you want to reduce the operating noise, such as when printing at night. In addition, you can specify the time range to reduce the operating noise.

Important

Set the current date and time in advance.

Setting the Sender Information
Authentication by the administrator password may be required to change the setting.

About the Machine Administration

If you do not know the administrator password, ask the administrator of the machine you are using.

Follow the procedure below to perform setting.

Make sure that the machine is turned on.
Flick the HOME screen, then tap Quiet setting.

Using the Operation Panel
Tap Use quiet mode or Use during specified hours.
- When Use quiet mode is selected:
  
  The confirmation screen is displayed, then the icon appears as the Quiet setting menu icon.
- When Use during specified hours is selected:
  
  The Quiet hours screen is displayed.
  1. Tap to display the screen below.
    1. Tap the numbers to specify the starting time.
      
      You can specify the hour from 0 to 24.
    2. Tap to confirm the starting time.
      
      After specifying the starting time, specify the ending time following the same procedure.
  2. Tap to confirm the time to start and to end.
  You can reduce the operating noise during the specified time.
  
  The confirmation screen is displayed, then the icon appears as the Quiet setting menu icon.
Important
- Operating speed may be reduced compared to when the quiet mode is not selected.
- This function may not be so effective depending on the machine's setting. Furthermore, certain noise, such as when the machine is preparing for printing, is not reduced.
Note
- You can set the quiet mode from the operation panel of the machine, the printer driver, or ScanGear (scanner driver). No matter how you set the quiet mode, the mode is applied when you perform operations from the operation panel of the machine or printing and scanning from the computer.