Cassette settings

By registering the paper size and the media type loaded in the cassette, you can prevent the printer from misprinting by displaying the message before printing starts when the paper size or the media type of the loaded paper differs from the print settings. In addition, you can allow the printer to switch the paper source automatically when a cassette runs out of paper.

• Register paper info

  Registers the paper size and the media type you load in the cassette.

  Note

  • For details on the proper combination of paper settings you can specify by the printer driver or on the LCD:

    Setting the Media Type with the Printer Driver and on the Printer

    Setting the Paper Size with the Printer Driver and on the Printer

• Det. paper mismatch

  If you select ON, the printer detects whether the paper size and the media type are the same as those registered in Register paper info. If printing starts with the settings that do not match, an error message is displayed on the LCD.

  Note

  • When OFF is selected, Detect reinsertion is disabled.

• Detect reinsertion

  If you select ON, the printer detects the cassette is reinserted. When the Register paper info screen is displayed, register the paper size and the media type.

• Auto feed switch

  If you select ON, the printer switches the paper source automatically when a cassette runs out of paper. Load A4, Letter, or Legal sized plain paper in both of the cassettes to activate this function.