FINE Cartridge Holder Does Not Move to the Position for Replacing

1. Check1 Is the POWER lamp off?

   Check if the POWER lamp is lit.

   The FINE cartridge holder will not move unless the power is on. If the POWER lamp is off, close the paper output cover and turn the machine on.

2. Check2 Is the Alarm lamp flashing?

   Close the paper output cover, confirm the number of times the Alarm lamp is flashing, take the appropriate action to resolve the error, and then reopen it. For details on how to resolve the error, see List of Support Code for Error.

3. Check3 Has the paper output cover been left open for 10 minutes or longer?

   If the paper output cover is left open for more than 10 minutes, the FINE cartridge holder moves to the position to protect it to prevent the print head from drying out. Close and reopen the paper output cover to return the FINE cartridge holder to the position for replacing.

4. Check4 Has the machine been printing continuously for a long period?

   If the machine has been printing continuously for a long time, the FINE cartridge holder may not move to the position for replacing since the print head may overheat.

Note

• Do not open the paper output cover while printing is in progress; otherwise, an error occurs