skip to main text

Copying Photos

You can scan printed photos and print them all at one time.

  1. Make sure that the machine is turned on.

  2. Load the photo paper.

  3. Select Advanced print on the HOME screen.

    LCD and Operation Panel

  4. Select Photo copy, then press the OK button.

  5. Confirm the on-screen instructions, then press the OK button.

  6. Load the printed photo on the platen glass following the on-screen instructions, then press the OK button.

    Note

    When scanning is complete, the print settings confirmation screen is displayed.

  7. Specify the settings as necessary.

    Use the UPDOWN button to change the setting item and use the LEFTRIGHT button to change the setting.

    figure: LCD

    Note

    • Depending on the setting item, some settings cannot be specified in combination with the setting of other setting items. If the setting cannot be specified in combination is selected, Error details is displayed on the LCD. In this case, press the left Function button to confirm the message, then change the setting.

    1. Page size

      Select the page size of the loaded paper.

    2. Type (Media type)

      Select the media type of the loaded paper.

    3. Print qlty (Print quality)

      Select print quality according to the original.

    4. Border (Bordered/Borderless print)

      Select bordered or borderless print.

    5. Photo fix

      Select No correction, Auto photo fix, or Fade restoration.

      Note

      • When No correction is selected, the machine prints the scanned image without correction.

      • When Auto photo fix is selected, the machine corrects the scanned image automatically.

      • When Fade restoration is selected, the machine corrects the scanned image that have faded over time.

  8. Specify the number of copies by using the + or - button.

    Note

    • By pressing the right Function button, you can preview an image of the printout on the preview screen. Use the LEFTRIGHT button to change the display.

    • If appears on the photo, the printed photo may not be scanned properly. Rescan the printed photo.

  9. Press the Color button for color printing, or the Black button for black & white printing.

    The machine starts printing.

    Note

    • If the printed photo was not scanned properly, the confirmation screen asking you if you continue printing is displayed. By selecting Yes, the machine starts printing. If you rescan the photo, select No and scan the photo again.