skip to main text

About PictBridge (Wireless LAN) Print Settings

Settings on a PictBridge (Wireless LAN) Compliant Device

This section describes the PictBridge (Wireless LAN) function of the machine. For the print settings on a PictBridge (Wireless LAN) compliant device, refer to the instructions given in the device's instruction manual.

Note

  • In the following description, names of setting items are given according to those used in Canon-brand PictBridge (Wireless LAN) compliant devices. Setting item names may be different depending on the brand or model of your device.

  • Some setting items explained below may not be available on some devices. When you cannot change print settings on a device, the printer prints images as follows:

    Paper size: 4" x 6"/ 10 x 15 cm

    Paper type: Photo

    Layout: 1-up, Bordered

    Date/File No. Print: Not printed

The following settings can be used when printing from a PictBridge (Wireless LAN) compliant device.

Paper size

4" x 6"/ 10 x 15 cm, 5" x 7"*, A4, 8.5" x 11"(Letter)

* Can be selected only on certain Canon-brand PictBridge (Wireless LAN) compliant devices. (May not be selected depending on the device.)

Paper type

  • Default: Photo Paper Plus Glossy II PP-201

  • Photo:

    Photo Paper Plus Glossy II PP-201

  • Plain:

    A4/Letter sized plain paper

Layout

Default (Bordered), Index, Bordered*

* With a Canon brand PictBridge (Wireless LAN) compliant device, selecting items with "i" mark allows you to print shooting info (Exif Data) on the margins of the specified data (1-up). (May not be available with some Canon-brand PictBridge (Wireless LAN) compliant devices.)

Print date & file no.

Default (Off: No printing), Date, File No., Both, Off

Trimming

Default (Off: No trimming), On (follow the camera's setting), Off