skip to main text

Cleaning the Inside of the Printer (Bottom Plate Cleaning)

Remove stains from the inside of the printer. If the inside of the printer becomes dirty, printed paper may get dirty, so we recommend performing cleaning regularly.

You need to prepare: a sheet of A4 or Letter-sized plain paper*

* Be sure to use a new piece of paper.

  1. Make sure that the power is turned on and remove any paper from the rear tray.

  2. Prepare paper.

    1. Fold a single sheet of A4 or Letter-sized plain paper in half lengthwise, then unfold the paper.

    2. Load this sheet of paper sideways in the rear tray with the open side facing you.

    3. Open the front cover gently, then pull out the paper output tray.

  3. Hold down the RESUME/CANCEL button until the POWER lamp flashes white five times, then release it immediately.

    The paper cleans the inside of the printer as it feeds through the printer.

    Check the folded parts of the ejected paper. If they are smudged with ink, perform Bottom Plate Cleaning again.

    Note

    • When performing Bottom Plate Cleaning again, be sure to use a new piece of paper.

If the problem is not resolved after performing cleaning again, the protrusions inside the printer may be stained. Wipe off any ink from the protrusions using a cotton swab or the like.

Important

  • Be sure to turn off the power and unplug the power cord before cleaning the printer.