skip to main text

Checking the Ink Status with the Ink Lamps

  1. Make sure that the power is turned on.

  2. Open the print head cover.

  3. Check the ink lamp.

    Close the print head cover after checking the ink lamp status.

    • The ink lamp is on.

      The ink tank is correctly installed.

    • The ink lamp is flashing.

      Flashing slowly (at around 3-second intervals)

      ...... Repeats

      Ink tank is running low. Prepare a new ink tank.

      Flashing fast (at around 1-second intervals)

      ...... Repeats

      Ink has run out. Replace it with a new one.

    • The ink lamp is off.

      The ink tank is not installed properly or the function for detecting the remaining ink level is disabled. If the ink tank is not firmly in place, press the PUSH mark on the ink tank until the ink tank clicks into place.

      If the ink lamp is still off after reinstalling the ink tank, there has been an error and the printer cannot print. Check the Alarm lamp on the printer.

    Note