Turning the Printer On and Off
Turning on the printer
-
Open the rear tray cover.
The paper output slot cover opens automatically.
-
Press the ON button to turn on the printer.
The POWER lamp flashes and then remains lit.
Note
- It may take a while for the printer to start printing immediately after you turn on the printer.
- If the Alarm lamp flashes, see If an Error Occurs.
- If you use the battery, make sure that it is charged. For details on how to check it, refer to the battery's instruction manual.
Turning off the printer
-
Press the ON button to turn off the printer.
When the POWER lamp stops flashing, the printer is turned off.
Important
- When you unplug the power cord after turning off the printer, be sure to confirm that the POWER lamp is off.
- If you stand the printer up or carry the printer before the POWER lamp goes off, this may cause the ink to leak or the printer to break.
Note
- It may take up to 40 seconds until the power is turned off.
-
You can set the printer to automatically turn off when no print jobs are sent to the printer for a certain interval. This is the default setting.