skip to main text

Cannot Detect the Printer during Wireless LAN Setup: Check 3

Is the printer connected to the access point?

By using the icon on the LCD, make sure that the printer is connected to the access point.

figure: LCD

If the icon is displayed:

The printer may be placed far away from the access point. Place the printer near the access point temporarily, then click Redetect on the Check Printer Settings screen.

When the printer is detected, follow the instructions on the screen to continue to set up the network communication.

If the printer cannot be detected, the printer is not connected to the access point. Connect the printer to the access point.

Click Back to Top on the Check Printer Settings screen to try to set up the network communication from the beginning.

If the icon is displayed:

Go to check 4.

Cannot Detect the Printer during Wireless LAN Setup: Check 4