Home

Click Here to Search

S205

Removing a Printable Disc

  1. Pull out the disc tray.

  1. Close the inner cover.

 Important

 If the inner cover is opened, you cannot print on paper as it will not feed properly. Make sure that the inner cover is closed.

  1. Remove the printable disc from the disc tray.

 Important

 Do not touch the printing surface when removing the disc from the disc tray.
 Note

 Dry the printing surface sufficiently before removing the disc. If you see printing on the disc tray or the transparent parts on inner or outer diameter of the printable disc, wipe them off after the printing surface has dried.

4.72 inches (12 cm) printable disc:

(1) Remove the printable disc from the disc tray.

3.15 inches (8 cm) printable disc:

(1) Remove the 3.15 inches (8 cm) disc adapter from the disc tray.

(2) Remove the 3.15 inches (8 cm) printable disc from the disc tray.

Storing the disc tray

When not using the disc tray, keep it in the disc tray storage compartment located under the top cover of the printer.

 Important

 If the disc tray is bent, it may become unusable. Always keep it on a flat place.
Page top