Check 1: Make sure that the power plug is securely plugged in, then turn the machine on.
While any lamp on the operation panel is flashing, the machine is initializing. Wait until the lamp stops flashing and remains lit.
NoteWhen printing large data such as a photo or graphics, it may take longer to start printing. While any lamp on the operation panel is flashing, the computer is processing data and sending it to the machine. Wait until printing starts.
Check 2: Make sure that the machine is connected to your computer properly.
When the machine is connected to your computer with a USB cable, make sure that the USB cable is securely plugged in to the machine and the computer, then check the followings:
If you are using a relay device such as a USB hub, disconnect it, connect the machine directly to the computer, and try printing again. If printing starts normally, there is a problem with the relay device. Consult the reseller of the relay device for details.
There could also be a problem with the USB cable. Replace the USB cable and try printing again.
When you use the machine over LAN, make sure that the machine is connected to the network with a LAN cable or is set up correctly.
Check 3: Make sure that the front tray is open.
Check 4: If you are printing from the computer and there are any unnecessary print jobs, delete them.
Check 5: Make sure that your machine's name is selected in the Print dialog.
The machine will not print properly if you are using a printer driver for a different printer.
Make sure that your machine's name is selected in Printer in the Print dialog.
NoteTo make the machine the one selected by default, select the machine for Default printer.
Check 6: Restart your computer if you are printing from the computer.
Page top |
