skip to main text

Attaching the Scanned Data to E-mail Using the Operation Panel of the Machine

Before attaching scanned data to an e-mail, confirm the following:

  • The scanner driver is installed.

    If the scanner driver is not yet installed, install the scanner driver from our website.

  • The machine is connected to a computer correctly.

    Make sure that the machine is connected to the computer correctly.

    Do not plug in or unplug the USB or LAN cable while the machine is in operation, or when the computer is in the sleep or standby mode.

    If you perform scanning via a network connection, make sure that all the required settings have been specified.

    Network Scan Settings

  • The mail software and the file name are specified in Canon IJ Scan Utility.

    You can specify the destination and the file name in Canon IJ Scan Utility. For details on settings of Canon IJ Scan Utility:

    Settings Dialog

  1. Make sure that the machine is turned on.

  2. Flick the HOME screen, then tap Scan.

    Using the Operation Panel

    The screen for selecting to which you save the data is displayed.

    figure: Touch screen

    Note

    • If the Scan standby screen for forwarding the data to the USB-connected computer is displayed on the touch screen, tap to display the screen for selecting to which you save the data.

  3. Tap Attach to E-mail.

  4. Tap the computer to forward the scanned data.

    Tap Local (USB) for a USB-connected computer, or tap the computer to forward the scanned data for a network-connected computer.

    figure: Touch screen

    The Scan standby screen is displayed.

  5. Specify the settings as necessary.

    figure: Touch screen
    1. Tap to select the document type.

      Document

      Scans the original on the platen glass as a document data applying the settings specified in Scan settings.

      Photo

      Scans the original on the platen glass as a photo data applying the settings specified in Scan settings.

    2. Tap to display Scan settings screen.

      For details on the setting items:

      Setting Items for Scanning Using the Operation Panel of the Machine

    3. Tap to display how to load the original.

    4. Tap to display the screen to select the destination.

  6. Load the original on the platen glass.

  7. Touch the Color button for color scanning, or the Black button for black & white scanning.

    • If you select JPEG for Format on the scan setting screen:

      The machine starts scanning and scanned data is forwarded to the computer and attached to an e-mail.

    • If you select PDF or Compact PDF for Format on the scan setting screen:

      The confirmation screen asking you if you continue scanning is displayed after scanning is complete.

      figure: Touch screen

      If you continue scanning, load the original on the platen glass and start scanning.

      If you do not continue scanning, tap End. The scanned data is forwarded to the computer.

    Scanned data is forwarded to the computer and attached to an e-mail according to the settings specified in Canon IJ Scan Utility.

    For the settings or how to send an e-mail, refer to the mail software's instruction manual.

    Remove the original on the platen glass after scanning is complete.