skip to main text

Cleaning the Print Head

Clean the print head if lines are missing or if horizontal white streaks are present in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print head consumes ink, so clean the print head only when necessary.

You need to prepare: a sheet of A4 or Letter-sized plain paper

  1. Make sure that the power is turned on.

  2. Load a sheet of A4 or Letter-sized plain paper in the cassette.

    After pushing the cassette back, the paper information registration screen is displayed on the touch screen. Select A4 or Letter for Page size and Plain paper for Type, then tap OK.

    Figure: Touch screen

    If a message is displayed on the screen, follow the directions in the message to complete registration.

  3. Open the paper output tray gently.

  4. Clean the print head.

    1. Flick the HOME screen, then tap Setup.

      The setup menu screen will appear.

    2. Tap Maintenance.

      The Maintenance screen will appear.

    3. Tap Cleaning.

      Figure: Touch screen

      The confirmation screen will appear.

    4. Tap Yes.

      The machine starts cleaning the print head.

      Do not perform any other operations until the machine completes the cleaning of the print head. This takes about 1 minute.

      The pattern print confirmation screen will appear.

    5. Tap Yes.

      The nozzle check pattern will be printed.

  5. Examine the nozzle check pattern.

Note