Default Values Set at Factory (Network)
Default Values of the LAN Connection
|
Item |
The default |
|---|---|
|
Change LAN |
Disable LAN |
|
SSID |
BJNPSETUP |
|
Communication mode |
Infrastructure |
|
Wireless LAN security |
Disable |
|
IP address (IPv4) |
Auto setup |
|
IP address (IPv6) |
Auto setup |
|
Set printer name* |
XXXXXXXXXXXX |
|
Enable/disable IPv6 |
Enable |
|
Enable/disable WSD |
Enable |
|
Timeout setting |
1 minute |
|
Enable/disable Bonjour |
Enable |
|
Service name |
Canon MB2300 series |
|
LPR protocol setting |
Enable |
|
Wireless LAN DRX setting |
Enable |
|
Wired LAN DRX setting |
Enable |
("XX" represents alphanumeric characters.)
* The default value in this item varies by machine. You can check the value in this item using the operation panel on the machine.
Default Values of the Access Point Mode
|
Item |
The default |
|---|---|
|
SSID (access point name) |
XXXXXX-MB2300series |
|
Wireless LAN security |
WPA2-PSK (AES) |
|
Password |
Serial number of the machine |
(XXXXXX is the last six digits of MAC address of the machine.)
