You can forward the scanned data to the computer using the operation panel of the machine.
Before forwarding scanned data to the computer, confirm the following:
ScanGear (scanner driver) is installed.
If ScanGear (scanner driver) is not yet installed, insert the Setup CD-ROM into the computer's disc drive, then install ScanGear (scanner driver).
The machine is connected to a computer correctly.
Make sure that the machine is connected to the computer correctly.
Do not plug in or unplug the USB cable while the machine is in operation, or when the computer is in the sleep or standby mode.
The destination and the file name are specified in Canon IJ Scan Utility.
You can specify the destination and the file name in Canon IJ Scan Utility. For details on settings of Canon IJ Scan Utility:
Make sure that the machine is turned on.
Press the SCAN button.
If you forward the scanned data to a computer for the first time, the Scan menu screen is displayed. Go to step 3.
If you have forwarded the scanned data to a computer, the Scan standby screen is displayed.
If you change the scan settings, press the Menu button, then go to step 3.
Go to step 6 if you do not change the scan settings.
Make sure that Document type is selected, then press the OK button.
Use the 
button to select the document type, then press the OK button.
NoteThe * (asterisk) on the LCD indicates the current setting.
The machine detects the type of the originals automatically and the image is forwarded in the optimized size, resolution and data format.
ImportantLoad originals properly according to their type; otherwise, some originals may not be scanned properly.
For details on how to load the original:
The following items can be scanned:
Photos, postcards, visiting cards, magazines, newspapers, documents, BD/DVD/CDs
The following items cannot be scanned properly.
A4 sized photos
Documents smaller than 5 inches x 7 inches (127 mm x 178 mm) such as a paperback with its backbone cut off
Originals on thin white paper
Long and narrow originals such as panoramic photographs
When you scan originals from the ADF, it may take longer to scan the first page.
Scans the original on the platen glass or in the ADF applying the optimized settings for scanning a document.
Scans the original on the platen glass as a photo data applying the optimized settings for scanning a photo.
Specify the scan settings.
Specify each scan setting in order.
NoteFor details on each setting item:
Setting Items on the Operation Panel of the Machine
Go to step 6 when Auto scan is selected for Document type.
Make sure that Scan size is selected, then press the OK button.
Use the button to select the scan size, then press the OK button.
Make sure that Data format is selected, then press the OK button.
Use the button to select the data format, then press the OK button.
Make sure that Scan resolution is selected, then press the OK button.
Use the button to select the scan resolution, then press the OK button.
The Scan standby screen is displayed after all the settings have been specified.
Load the original document on the platen glass or in the ADF.
Press the Color button for color scanning, or the Black button for black & white scanning.
NoteIf the original is not loaded properly, a message is displayed on the LCD. Load the original on the platen glass or in the ADF according to the scan settings.
If you load the original in the ADF:
The machine starts scanning and scanned data is forwarded to the computer.
If you load the original on the platen glass:
When you select JPEG or TIFF for Data format, the machine starts scanning and scanned data is forwarded to the computer.
When you select PDF or Compact PDF for Data format, the confirmation screen asking you if you continue scanning is displayed after scanning is complete.
Selecting Yes and pressing the OK button allow you to scan the originals continuously. Load the next document on the platen glass and start scanning.
By selecting No and pressing the OK button, scanning is complete and the data is forwarded to the computer in one PDF file.
Scanned data is forwarded to the computer according to the settings specified in Canon IJ Scan Utility.
Remove the original on the platen glass or from the document output slot after scanning is complete.
ImportantIf the scanning result with Auto scan is not satisfactory, select Document or Photo according to the original in step 4, then specify the scan size or other setting items in step 5.
If you scan originals from a computer using My Image Garden, My Image Garden enables you to edit the scanned images, such as optimizing or trimming.
In addition, you can edit or print the scanned images using the compatible application software to make better use of them.
Page top |
