skip to main text

Cut to standard size

Specifies standard size as the output page size when printing on roll paper.

Display this item by selecting the following.

Printer settings > Print settings > HP-GL/2 print settings > Paper settings

  • ON

    Cuts to standard size in accordance with the roll paper width.

    When there are two lengths/widths applicable for a given roll paper width, the optimum size is selected automatically.

    Note

    • Nesting cannot be performed while ON is selected.
    • If ON is selected for Save paper and there is blank space above/below the image, the size will not be standard size.
    • When ON is selected for Print centered, printing will be in the center of the standard size.
    • If there is no standard size corresponding to the roll paper width, operation is the same as if OFF is selected. No message is displayed.
    • For information about supported standard sizes, see Standard Size Table.
  • OFF

    Cutting according to standard size is not performed.

STANDARD CUT EXAMPLES

  • A3-size width roll paper

    1. Position of cut when OFF
    2. Position of cut when ON
  • A3-size width roll paper

    1. Position of cut when OFF
    2. Position of cut when ON