Feeding Roll Paper Manually

Important

• If the leading edge of the paper protrudes forward from its original position by using this function, you may not be able to switch the output location. If you cannot switch the output location, cut the paper before switching the output location.

  • Cutting Roll Paper

• Do not manually feed rolls to increase the margins at the edge of the printed document. If you need to increase the margin, add a margin to the tip of the image in the printing direction when printing.

• If turning off the power while the paper protrudes forward from its original position, you will not be able to remove the paper. Turn off the power after removing the paper.

  If you turn off the power before removing the paper, turn it on before removing the paper. Also, in this case, the paper may be scratched.

1. Select the paper setting display area on Home screen.

   

2. Select paper source.

   

3. Select Feed/cut.

4. Tap or touch Advance and Rewind to move roll paper forward or back.

   Note

   • Tapping Advance or Rewind moves the roll paper approximately 0.04 inch (1 mm).

     Touching Advance or Rewind moves the roll paper until you release the key. If "Cannot advance the paper any further." appears on the touch screen, release the key.

5. Select OK when you have determined position of roll paper.