skip to main text

Back / Side

Illustration of the rear of the printer
A: Carrying Grips
Hold here when carrying the printer.
B: USB Port
Connect a USB cable to this port. The printer is compatible with Hi-Speed USB connections.
C: Wired LAN Connector
Connect an Ethernet cable to this port. The lamp is lit if the Ethernet cable is connected correctly and communication is possible between the computer and printer.
D: Power Cord Connector
Connect the power cord to this connector.
E: Locking Caster
A locking caster that, when the lock is in the ON position, immobilizes the printer. When moving the printer, be sure to set the locking caster lock to the OFF position to release the lock. If you move it while the locking casters are locked, the floor may become scratched.