Start up Remote UI

You can check the printer status and change the printer settings using the web browser on your smartphone, tablet, or computer.

To check the printer status and to change the printer settings, display "Remote UI" on the web browser.

Note

• Remote UI is a software that enables you to perform operations, which are usually performed on the printer's operation panel, using a Web browser over a network.

  LAN connection with the printer is required to use Remote UI.

• You can use Remote UI on the following OS and the web browser.

  • iOS device

    OS: iOS 12.0 or later

    Web browser: iOS standard Web browser (Mobile Safari)

  • Android device

    OS: Android 5.1 or later

    Web browser: Android standard Web browser (Browser or Chrome)

  • macOS device

    OS: macOS Sierra 10.12 or later

    Web browser: Safari 10.0 or later

  • Windows device

    OS: Windows 7 SP1 or later

    Web browser: Microsoft Edge, Internet Explorer 11, Mozilla Firefox, Google Chrome

1. Check printer's IP address.

   1. Flick HOME screen and tap LAN settings.

      • Home Screen Menu Composition

   2. Tap the enabled LAN.

      Diagonal lines are displayed for disabled LAN icons.

   3. Check IPv4 address.

2. Open web browser on your smartphone, tablet, or computer and enter IP address.

   Enter as following in the URL field of the web browser.

   http://XXX.XX.X.XXX

   Enter the IP address of the printer in "XXX.XX.X.XXX".

   When you access, "Remote UI" will be displayed on the web browser on your smartphone, tablet, or computer.

   

   Note

   • If you display Remote UI for the first time on your smartphone, tablet, or computer, download the root certificate, and then register it.
     • Registering Printer's Root Certificate to Web Browser for SSL Communication
   • If the root certificate is not registered, a message to warn you that the secure connection is not guaranteed may appear.

3. Select Log in.

   The password authentication screen appears.

   Note

   • When the standard user mode is enabled, choose either administrator mode or standard user mode to log on.

     After choosing a mode and selecting Log in, the password authentication screen of each mode appears.

4. Enter password.

   When the password authentication is complete, the menus that can be utilized are displayed on the web browser.

   Important

   • The password is set at the time of purchase. The password is the printer serial number. The printer serial number is printed on the sticker attached on the printer. It consists of 9 alphanumeric characters (four alphabets followed by five numbers).

     For details on setting password, see Setting Passwords Using Remote UI.

5. Confirm that the main screen of Remote UI is displayed.

   For changeable setting items, see below.

   • Changeable Setting Items Using Remote UI

   When you finish checking printer status and changing printer settings, select Log out.